【深度学习】ViT模型详解与Pytorch代码实现

2025-01-23 17:03 浙江

介绍

使用PyTorch 从头开始实现 ViT模型代码，在 CIFAR-10 数据集上训练ViT模型以完成图像分类。

ViT的架构

ViT 的架构受到 BERT 的启发，BERT 是一种仅编码器的 transformer 模型，通常用于文本分类或命名实体识别等 NLP 监督学习任务。ViT 背后的主要思想是，图像可以看作是一系列的补丁，在 NLP 任务中可以被视为令牌

输入图像被分割成小块，然后被展平为向量序列。然后，这些向量由 transformer 编码器处理，它允许模型通过自注意力机制学习补丁之间的交互。然后，transformer 编码器的输出被馈送到一个分类层，该分类层输出输入图像的预测类别

代码实现

下面是模型各个部分组件的 PyTorch代码实现。

图像嵌入转换

为了将输入图像馈送到 Transformer 模型，我们需要将图像转换为一系列向量。这是通过将图像分割成一个不重叠的补丁网格来完成的，然后线性投影这些补丁以获得每个补丁的固定大小的嵌入向量。为此，我们可以使用 PyTorch 的层：nn.Conv2d

class PatchEmbeddings(nn.Module):
    """
    Convert the image into patches and then project them into a vector space.
    """

    def __init__(self, config):
        super().__init__()
        self.image_size = config["image_size"]
        self.patch_size = config["patch_size"]
        self.num_channels = config["num_channels"]
        self.hidden_size = config["hidden_size"]
        # Calculate the number of patches from the image size and patch size
        self.num_patches = (self.image_size // self.patch_size) ** 2
        # Create a projection layer to convert the image into patches
        # The layer projects each patch into a vector of size hidden_size
        self.projection = nn.Conv2d(self.num_channels, self.hidden_size, kernel_size=self.patch_size, stride=self.patch_size)

    def forward(self, x):
        # (batch_size, num_channels, image_size, image_size) -> (batch_size, num_patches, hidden_size)
        x = self.projection(x)
        x = x.flatten(2).transpose(1, 2)
        return x

kernel_size=self.patch_size并确保图层的滤镜应用于非重叠的面片。stride=self.patch_size在补丁转换为嵌入序列后，[CLS] 标记被添加到序列的开头，稍后将在分类层中用于对图像进行分类。[CLS] 令牌的嵌入是在训练期间学习的。

由于来自不同位置的补丁对最终预测的贡献可能不同，我们还需要一种方法将补丁位置编码到序列中。我们将使用可学习的位置嵌入向量将位置信息添加到嵌入向量中。这类似于在 Transformer 模型中为 NLP 任务使用位置嵌入的方式。

class Embeddings(nn.Module):        
    def __init__(self, config):
        super().__init__()
        self.config = config
        self.patch_embeddings = PatchEmbeddings(config)
        # Create a learnable [CLS] token
        # Similar to BERT, the [CLS] token is added to the beginning of the input sequence
        # and is used to classify the entire sequence
        self.cls_token = nn.Parameter(torch.randn(1, 1, config["hidden_size"]))
        # Create position embeddings for the [CLS] token and the patch embeddings
        # Add 1 to the sequence length for the [CLS] token
        self.position_embeddings = \
            nn.Parameter(torch.randn(1, self.patch_embeddings.num_patches + 1, config["hidden_size"]))
        self.dropout = nn.Dropout(config["hidden_dropout_prob"])

    def forward(self, x):
        x = self.patch_embeddings(x)
        batch_size, _, _ = x.size()
        # Expand the [CLS] token to the batch size
        # (1, 1, hidden_size) -> (batch_size, 1, hidden_size)
        cls_tokens = self.cls_token.expand(batch_size, -1, -1)
        # Concatenate the [CLS] token to the beginning of the input sequence
        # This results in a sequence length of (num_patches + 1)
        x = torch.cat((cls_tokens, x), dim=1)
        x = x + self.position_embeddings
        x = self.dropout(x)
        return x

在此步骤中，输入图像被转换为带有位置信息的嵌入序列，并准备馈送到 transformer 层。

多头注意力

在介绍 transformer 编码器之前，我们首先探索 multi-head attention module，这是它的核心组件。多头注意力用于计算输入图像中不同色块之间的交互。多头注意力由多个注意力头组成，每个注意力头都是一个注意力层。

让我们实现多头注意力模块的 head。该模块将一系列嵌入向量作为输入，并计算每个嵌入向量的查询向量、键向量和值向量。然后，使用查询和关键向量来计算每个标记的注意力权重。然后，使用注意力权重通过值向量的加权和来计算新的嵌入。我们可以将此机制视为数据库查询的软版本，其中查询向量在数据库中查找最相关的键向量，并检索值向量以计算查询输出。

class AttentionHead(nn.Module):
    """
    A single attention head.
    This module is used in the MultiHeadAttention module.
    """
    def __init__(self, hidden_size, attention_head_size, dropout, bias=True):
        super().__init__()
        self.hidden_size = hidden_size
        self.attention_head_size = attention_head_size
        # Create the query, key, and value projection layers
        self.query = nn.Linear(hidden_size, attention_head_size, bias=bias)
        self.key = nn.Linear(hidden_size, attention_head_size, bias=bias)
        self.value = nn.Linear(hidden_size, attention_head_size, bias=bias)

        self.dropout = nn.Dropout(dropout)

    def forward(self, x):
        # Project the input into query, key, and value
        # The same input is used to generate the query, key, and value,
        # so it's usually called self-attention.
        # (batch_size, sequence_length, hidden_size) -> (batch_size, sequence_length, attention_head_size)
        query = self.query(x)
        key = self.key(x)
        value = self.value(x)
        # Calculate the attention scores
        # softmax(Q*K.T/sqrt(head_size))*V
        attention_scores = torch.matmul(query, key.transpose(-1, -2))
        attention_scores = attention_scores / math.sqrt(self.attention_head_size)
        attention_probs = nn.functional.softmax(attention_scores, dim=-1)
        attention_probs = self.dropout(attention_probs)
        # Calculate the attention output
        attention_output = torch.matmul(attention_probs, value)
        return (attention_output, attention_probs)

然后，所有注意力头的输出被连接起来并线性投影，以获得多头注意力模块的最终输出。

class MultiHeadAttention(nn.Module):    """    Multi-head attention module.    This module is used in the TransformerEncoder module.    """
    def __init__(self, config):        super().__init__()        self.hidden_size = config["hidden_size"]        self.num_attention_heads = config["num_attention_heads"]        # The attention head size is the hidden size divided by the number of attention heads        self.attention_head_size = self.hidden_size // self.num_attention_heads        self.all_head_size = self.num_attention_heads * self.attention_head_size        # Whether or not to use bias in the query, key, and value projection layers        self.qkv_bias = config["qkv_bias"]        # Create a list of attention heads        self.heads = nn.ModuleList([])        for _ in range(self.num_attention_heads):            head = AttentionHead(                self.hidden_size,                self.attention_head_size,                config["attention_probs_dropout_prob"],                self.qkv_bias            )            self.heads.append(head)        # Create a linear layer to project the attention output back to the hidden size        # In most cases, all_head_size and hidden_size are the same        self.output_projection = nn.Linear(self.all_head_size, self.hidden_size)        self.output_dropout = nn.Dropout(config["hidden_dropout_prob"])

    def forward(self, x, output_attentions=False):        # Calculate the attention output for each attention head        attention_outputs = [head(x) for head in self.heads]        # Concatenate the attention outputs from each attention head        attention_output = torch.cat([attention_output for attention_output, _ in attention_outputs], dim=-1)        # Project the concatenated attention output back to the hidden size        attention_output = self.output_projection(attention_output)        attention_output = self.output_dropout(attention_output)        # Return the attention output and the attention probabilities (optional)        if not output_attentions:            return (attention_output, None)        else:            attention_probs = torch.stack([attention_probs for _, attention_probs in attention_outputs], dim=1)            return (attention_output, attention_probs)

编码器

编码器由一堆MHA + MLP组成。每个 transformer 层主要由我们刚刚实现的多头注意力模块和前馈网络组成。为了更好地扩展模型并稳定训练，向 transformer 层添加了两个 Layer 归一化层和跳过连接。

让我们实现一个 transformer 层（在代码中称为，因为它是 transformer 编码器的构建块）。我们将从前馈网络开始，这是一个简单的两层 MLP，中间有 GELU 激活。Block

class MLP(nn.Module):    """    A multi-layer perceptron module.    """    def __init__(self, config):        super().__init__()        self.dense_1 = nn.Linear(config["hidden_size"], config["intermediate_size"])        self.activation = NewGELUActivation()        self.dense_2 = nn.Linear(config["intermediate_size"], config["hidden_size"])        self.dropout = nn.Dropout(config["hidden_dropout_prob"])
    def forward(self, x):        x = self.dense_1(x)        x = self.activation(x)        x = self.dense_2(x)        x = self.dropout(x)        return x

我们已经实现了多头注意力和 MLP，我们可以将它们组合起来创建变压器层。跳过连接和层标准化将应用于每个层的输入

class Block(nn.Module):    """    A single transformer block.    """
    def __init__(self, config):        super().__init__()        self.attention = MultiHeadAttention(config)        self.layernorm_1 = nn.LayerNorm(config["hidden_size"])        self.mlp = MLP(config)        self.layernorm_2 = nn.LayerNorm(config["hidden_size"])
    def forward(self, x, output_attentions=False):        # Self-attention        attention_output, attention_probs = \            self.attention(self.layernorm_1(x), output_attentions=output_attentions)        # Skip connection        x = x + attention_output        # Feed-forward network        mlp_output = self.mlp(self.layernorm_2(x))        # Skip connection        x = x + mlp_output        # Return the transformer block's output and the attention probabilities (optional)        if not output_attentions:            return (x, None)        else:            return (x, attention_probs)

transformer 编码器按顺序堆叠多个 transformer 层：

class Encoder(nn.Module):    """    The transformer encoder module.    """
    def __init__(self, config):        super().__init__()        # Create a list of transformer blocks        self.blocks = nn.ModuleList([])        for _ in range(config["num_hidden_layers"]):            block = Block(config)            self.blocks.append(block)
    def forward(self, x, output_attentions=False):        # Calculate the transformer block's output for each block        all_attentions = []        for block in self.blocks:            x, attention_probs = block(x, output_attentions=output_attentions)            if output_attentions:                all_attentions.append(attention_probs)        # Return the encoder's output and the attention probabilities (optional)        if not output_attentions:            return (x, None)        else:            return (x, all_attentions)

ViT模型构建

将图像输入到 embedding 层和 transformer 编码器后，我们获得图像补丁和 [CLS] 标记的新嵌入。此时，嵌入在经过 transformer 编码器处理后应该有一些有用的信号用于分类。与 BERT 类似，我们将仅使用 [CLS] 标记的嵌入传递到分类层。

分类层是一个完全连接的层，它将 [CLS] 嵌入作为输入并输出每个图像的 logit。以下代码实现了用于图像分类的 ViT 模型：

class ViTForClassfication(nn.Module):    """    The ViT model for classification.    """
    def __init__(self, config):        super().__init__()        self.config = config        self.image_size = config["image_size"]        self.hidden_size = config["hidden_size"]        self.num_classes = config["num_classes"]        # Create the embedding module        self.embedding = Embeddings(config)        # Create the transformer encoder module        self.encoder = Encoder(config)        # Create a linear layer to project the encoder's output to the number of classes        self.classifier = nn.Linear(self.hidden_size, self.num_classes)        # Initialize the weights        self.apply(self._init_weights)
    def forward(self, x, output_attentions=False):        # Calculate the embedding output        embedding_output = self.embedding(x)        # Calculate the encoder's output        encoder_output, all_attentions = self.encoder(embedding_output, output_attentions=output_attentions)        # Calculate the logits, take the [CLS] token's output as features for classification        logits = self.classifier(encoder_output[:, 0])        # Return the logits and the attention probabilities (optional)        if not output_attentions:            return (logits, None)        else:            return (logits, all_attentions)

参考

代码其实是我从github上面整理加工跟翻译得到的（个人认为非常的通俗易懂，有点pytorch基础都可以看懂学会），感兴趣的可以看这里：

https://github.com/lukemelas/PyTorch-Pretrained-ViT/blob/master/pytorch_pretrained_vit/transformer.pyhttps://tintn.github.io/Implementing-Vision-Transformer-from-Scratch/

往期精彩回顾

写了一本适合本科生的机器学习入门书

适合初学者入门人工智能的路线及资料下载

(图文+视频)机器学习入门系列下载

机器学习及深度学习笔记等资料打印

《统计学习方法》的代码复现专辑

交流群

请备注：”昵称-学校/公司-研究方向“，例如：”张小明-浙大-CV“加群。

（也可以加入机器学习交流qq群772479961）

阅读原文

跳转微信打开

Fish AI Reader

FishAI

联系邮箱 441953276@qq.com

相关标签